Hunting Tips: Post-Trip Actions

The end of a successful (or even unsuccessful) hunt doesn't occur when you leave the field—it ends when all of your gear is properly cleaned, stored, and prepared for the next outing. Diligent post-trip actions ensure the longevity of your equipment, maintain safety, and save you valuable time before your next adventure.

Proper firearm cleaning is paramount to safety and function. Neglected firearms can become unreliable or dangerous.

1. Safety First: Always confirm the firearm is unloaded. Remove all ammunition from the cleaning area.
2. Disassemble: Follow the manufacturer's guide to field strip the firearm.
3. Clean the Barrel: Run a bore brush coated with solvent through the barrel several times. Follow with patches until they come out clean.
4. Clean Action and Chamber: Use a soft brush and solvent to clean all moving parts of the action and the chamber.
5. Lubrication: Apply a thin layer of gun oil to all friction points and metal surfaces to prevent rust. Avoid over-lubrication.

B. Storage

Store firearms and ammunition separately in secure, dry environments.

• Firearms should be stored in a locked safe or cabinet at a consistent temperature to minimize the risk of moisture accumulation.
• Ammunition should be stored in its original packaging in a cool, dry place, away from firearms.

II. Clothing and Gear Maintenance

Your hunting apparel and gear take a beating in the field and require specific care to remain effective.

A. Hunting Clothing

1. Scent Control: Wash all hunting clothing, especially base layers and outerwear, with an unscented, hunting-specific detergent. This removes human odors and environmental contaminants.
2. Drying: Air dry all specialized clothing to maintain the integrity of waterproof membranes and scent-control technology. Avoid high heat.
3. Repair: Inspect clothing for tears, snags, or broken zippers. Make necessary repairs promptly, or set aside items that require professional attention.

B. Footwear

C. Optics and Electronics

• Optics (Scopes, Binoculars): Use a lens brush or canned air to remove grit. Clean with a lens cloth and approved cleaning solution. Never use shirt tails or harsh chemicals.
• Electronics (GPS, Rangefinders): Remove batteries from devices that will be stored for a long period to prevent corrosion. Back up any critical data, such as waypoints or recorded tracks, and save it to a secure location at File.
• Knives: Clean blades thoroughly to remove blood and residue. Sharpen the blade and apply a light coat of oil before storing in a dry sheath.

III. Vehicle and Trailer Clean-Up

Do not overlook the vehicle that transported you and your harvest.

A. Exterior and Interior

1. Wash: Remove mud and dirt from the exterior, especially the undercarriage, which can trap moisture and accelerate rust.
2. Interior: Vacuum the interior, paying special attention to carpets and floor mats where debris and biological material may have accumulated.
3. Odor Control: Deep clean any areas where game or blood was transported. Use an enzymatic cleaner to break down organic matter and eliminate lingering odors.

B. Trailer Maintenance

If you used a trailer or ATV, perform an inspection.

• Check all lights and wiring for damage.
• Inspect tire pressure and wheel bearings.
• Schedule any necessary maintenance for the ATV.

IV. Post-Trip Administrative Review

The final steps involve documenting the hunt and planning for the future.

• Field Notes: Review and log all critical information from the trip, including weather, game sightings, successes, and lessons learned in a dedicated log or journal.
• Inventory: Take an inventory of all gear, noting items that need replacement or repair.
• Future Planning: Note any improvements needed for your next trip, such as scouting new areas or adjusting gear selection.